Xerox Wide Format 6050 User Manual Download Page 58

Page: 58 / 304

2.1

Overview of the 6030/6050 Wide
Format Print Service

This section provides an overview of the 6030/6050 Wide Format print service.

What is the 6030/6050 Wide Format Print Service?

The 6030/6050 Wide Format print service is software that processes print jobs

that it receives from a client. The 6030/6050 Wide Format print service enables

all types of image data to be printed in the supported formats, including standard

and non-standard size documents, enlarged and reduced images, and split

(fragmented) images. It also allows the user to view the status of print jobs,

cancel print jobs, and change print job priority.

Data Formats that can be Processed

Processing is possible for the following data formats.

•

HP-GL formats (HP-GL, HP-GL/2, HP-RTL)

•

VERSATEC formats (VRF, VCGL)

•

TIFF formats (conforming to TIFF Revision 6.0)

•

CALS formats (CALS Type 1)

•

PS/PDF formats (PostScript 3.0, PDF Version 1.3)(Optional)

Communication Interfaces

The following communication interfaces are supported.

•

Ethernet (100Base-TX and 10Base-T)

•

RS232C

•

Centronics (optional)

•

VPI (optional)

Summary of Contents for Wide Format 6050

















































































































































































































































































































Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands

Xerox Wide Format 6050, User Manual

Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands