Xerox Wide Format 6050 User Manual Download Page 219

Page: 219 / 304

5.3

Test Printing

This function prints out a test pattern to verify correct printer operation. The media size

can be selected from A0 through A4.

Procedure

Press the <

> key with [TEST PLOT]

displayed on the parameter selection screen.

Press the <

> key.

Select the size of the media to print with the use

of the <

> and <

> keys, and then press the

<Set> key.

Press the <

> key once it has been set.

Press the <Set> key when [SET: to Print.] is

displayed.

The test data will be printed.

Refer to "2.2 Printer Control Panel Usage" for detailed instructions on printer control

panel operation.

TEST PLOT

Plot Size

TEST PLOT

SET : to Print.

Summary of Contents for Wide Format 6050

















































































































































































































































































































Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands

Xerox Wide Format 6050, User Manual

Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands