Xerox Wide Format 6050 User Manual Download Page 241

Page: 241 / 304

Other Subcommands

This section explains the ftp subcommands.

ascii:

Sets transfer data to the ASCII format.

bin:

Sets transfer data to the binary format.

bye:

Terminates FTP processing.

cd:

Change directory; will display logical printer.

dir:

Displays directory; will display logical printers set from the control panel.

If nothing is specified in the

Xerox 6030/6050 Wide Format

, only the logical

printer at address 00 is displayed.

ls:

Displays directory; will display logical printers set from the console panel.

If nothing is specified in the

Xerox 6030/6050 Wide Format

, only the logical

printer at address 00 is displayed.

mput:

Instructs the two or more specified files to be transferred to

Xerox 6030/6050

Wide Format

interactively. However, this transfer can be specified to an

existing logical printer only.

open:

Connects the client workstation to the

Xerox 6030/6050 Wide Format

put:

Transfers a specified file to the

Xerox 6030/6050 Wide Format

. However, this

transfer can be specified to an existing logical printer only.

pwd:

Present working directory; displays the currently specified logical printer

name.

send:

Transfers a specified file to the

Xerox 6030/6050 Wide Format

. However, this

transfer can be specified to an existing logical printer only.

Summary of Contents for Wide Format 6050

















































































































































































































































































































Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands

Xerox Wide Format 6050, User Manual

Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands