Xerox Wide Format 6050 User Manual Download

Page: 116 / 304

3.7

Printing a Configuration List

The procedures below explain how to print a configuration list that shows the hardware

and software configuration, communication parameter (port) settings, and system

parameter settings of the printer. This list may be printed from either the printer control

panel or Print Services on Web.

From the Printer Control Panel

Press the <

> key with [PORT SETTING]

displayed.

Select [PRINT CONFIG] with the <

> key,

and then press the <

> key.

Press the <Set> key when [SET: to Print.] is

displayed.

The list of settings will be printed.

PORT SETTING

PRINT CONFIG

SET: to Print.

Summary of Contents for Wide Format 6050

















































































































































































































































































































Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands

Xerox Wide Format 6050, User Manual

Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands