Xerox Wide Format 6050 User Manual Download

Page: 59 / 304

Printing Methods

Documents may be submitted from a client to the 6030/6050 Wide Format

Printer using any of the following.

•

Ethernet (Direct) Printing

This capability is for UNIX systems. Printing takes place over TCP/IP networks

using the ftp and lpr commands.

•

Wide Format Windows Driver

The Microsoft

Windows

print drivers (32 bit only) enable users to print

documents from various Windows applications.

•

BT-PlotAssistant (Ver. 3.4.0 or later)(Optional)

BT-PlotAssistant is printer support software that runs on Windows operating

systems. Using BT-PlotAssistant’s simple user interface, the user can submit

documents to the 6030/6050 Wide Format printer.

•

PostScript/PDF Driver (PS/PDF)(Optional)

The PostScript/PDF driver provides enhanced printing performance and enables

users to print PDF documents. The customer who purchases the PS/PDF driver

is provided with a Feature Key which is required for driver installation.

Refer to "Chapter 11 Ethernet Print Service (for UNIX)" for details on available

functions.

Serial output is not supported by the Wide Format Windows Driver.

Refer to the Xerox 6030/6050/6204 Wide Format Windows Driver User Guide for

details on available functions.

Refer to the Xerox 6030/6050/6204 Wide Format BT Plot Assistant User Guide for

details on available functions.

Refer to the Xerox 6030/6050/6204 Wide Format PostScript Driver User Guide for

details on available functions.

Summary of Contents for Wide Format 6050

















































































































































































































































































































Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands

Xerox Wide Format 6050, User Manual

Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands