Xerox Wide Format 6050 User Manual Download

Page: 165 / 304

Joint style

UNJOINT

Does not join the lines.

BEVEL

Joins the outside corner of one line to the outside corner of

the other line.

MITER

Extends the outside corners of both lines until they meet in a

miter.

ROUND

Rounds off the area where the two lines meet.

TRIANGLE

Extends the joint by half the line width, and connects the top

and outer edges of both lines.

MITERED/BEVELED

Extends the joint by the length calculated from the line

width and Miter Limit, and connects the top.

Summary of Contents for Wide Format 6050

















































































































































































































































































































Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands

Xerox Wide Format 6050, User Manual

Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands