Xerox Wide Format 6050 User Manual Download Page 139

Page: 139 / 304

Input Option

Sets up the input image size. Two judgment methods are available for input image size.

•

Automatic (AUTO)

Calculates the coordinates of the input image and automatically determines the nearest

media size.

•

Specify Size

Enables the user to manually select the media size of the input image. The media size

can be selected from standard sizes and user-defined sizes.

This option is usually set to [AUTO]. However, the media size can be specified

manually if the size of the print is to be restricted to a fixed size. Any part of the image

that exceeds the size of the specified media will be cut off.

Summary of Contents for Wide Format 6050

















































































































































































































































































































Search results

Summary of Contents for Wide Format 6050

Reviews:

Brands by name

Popular brands

Xerox Wide Format 6050, User Manual

Search results

Summary of Contents for Wide Format 6050

Reviews:

Brands by name

Popular brands