Xerox Wide Format 6050, User Manual

Page: 263 / 304

8.2
Poor Image Quality
Perform the following corrective measures if the copies or prints display one of the
image quality defects listed below.
Image Quality Defect Corrective Measure
The print displays excessive
background Verify that the image density setting is correct.
Check the quality of the original.
• Reduce the image density setting.
• Increase the background suppression setting.
Some parts of the image
did not print or are
blurred Verify that the image density setting is correct.
• Change the image density setting
.
Determine if the media is damp.
•
Switch on
the paper heater switch, if it is off.
• Replace the damp media with new media.
• Change the sharpness setting.
Confirm that the size of the document does not
exceed the limit.
• Check the length and width of the document. If the
size exceed the limit, split the document and copy it
in sections.
• Verify that sufficient memory is installed.
The print is wrinkled Determine if the media is damp.
•
Switch on
the paper heater switch, if it is off.
• Replace the damp media with new media.