Xerox Wide Format 6050, User Manual

Page: 155 / 304

Settings
The settings for this function are as follows.
Menu Item Description
Media Size
This parameter can be selected from [
AUTO
], [
OTHER
], [
MIX
],
[
MIX2
], or any of the standard media sizes
.
The default setting is
[AUTO] .
[ AUTO ] The standard shape priority mode. If the length of the
document exceeds the standard size, the media is cut
to the standard shape that has been increased in
length.
[ OTHER ] Synchronized cutting is performed on all images.
[ MIX ] If images that are smaller than the A0 size exceed the
standard size, the media is cut to the standard size that
has been increased in length. Synchronized cutting is
performed on all images that exceed the A0 size.
[
MIX2
] If images that are smaller than the A0 size exceed the
standard size, synchronized cutting is performed on
all images.
The selection items for the media size will differ in accordance with
the [Input size] parameter set for the Media series.
• Synchronized cutting is where the media is cut to the non-standard size that matches
the length of the image.
• All printing is carried out on roll media when [OTHER] has been selected.
•
Refer to the section on "Media Series" for further details on paper size series.
Menu Item Description
Number of
Fragments
Sets the number of copies to be printed consecutively in a range from
0 to 99 when [Paper Size] has been specified. The default setting is
[0].
A value that subtracts 1 from the length of the standard size will be
set for [Connect]. For example, in the event of 4A3, 3 will be set for
the [Connect].
Lead and
Trail Margins Specifies whether or not margins will be added. The default setting is
[No] .
[ NO ] No margins will be added.
[
ALL
] Top and bottom margins will be added to all data.
[
LONG
] Top and bottom margins will be added to long images.
Lead Margin Sets the top margin in a range from 0 to 999 mm when the [Margin]
parameter is set to [ALL] or [LONG] .
Trail Margin Sets the bottom margin in a range from 0 to 999 mm when the
[Margin] parameter is set to [ALL] or [LONG] .