Xerox Wide Format 6050 User Manual Download Page 117

Page: 117 / 304

From Print Services on Web

Start Print Services on Web, log in as Administrator, and select the

[Properties] tab.

Select [Print Settings] in the System parameters menu.

The current print settings will display in the right pane.

Using the scrollbar on the right side of the window, scroll to the bottom of the

Print Settings list, and then select the [Print] button.

The printer will print a configuration list that is identical to the list from the

printer control panel.

Summary of Contents for Wide Format 6050

















































































































































































































































































































Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands

Xerox Wide Format 6050, User Manual

Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands