Xerox Wide Format 6050 User Manual Download

Page: 43 / 304

1.8

Loading Roll Media

The message ‘Replace xxx media." will display when there is no media loaded

or when the roll in use runs out.

The media size displayed on the control panel will turn off when there is no

media in the machine.

Two rolls of media can be loaded in each of the media trays.

Procedure

Open the media tray.

Remove the shaft containing the roll paper

that is to be replaced.

Refer to the instructions provided in " Setting Up Media" and set up the media

parameters after the roll media has been loaded.

Media can be reloaded in the lower media tray while printing is occurring from the

upper media tray. Be sure that the Feeder LED on the lower media tray is off (not

illuminated) before opening the lower media tray.

Summary of Contents for Wide Format 6050

















































































































































































































































































































Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands

Xerox Wide Format 6050, User Manual

Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands