Xerox Wide Format 6050, User Manual

Page: 284 / 304

Appendix 2
HP-GL/HP-GL2 Command List
This section explains the HP-GL and HP-GL/2 command support status that are unique
to the 6030/6050 Wide Format.
Command List
The following table shows the HP-GL and HP-GL/2 command support status.
y Command fully supported.
y* Activates different actims from other ordinary commands. (Meaning in [ ])
n Command not supported and ignored.
Com-
mand
Command Meaning and action HP-GL HP-GL/2
6030/6050
Wide Format
AA
Plots a circle around a point specified by absolute
coordinates. y y y
AC Specifies the starting point of a fill pattern. y y
AD Specifies a substitute font for labels.
[Only vector fonts supported] y y
AF
Feeds paper by one page. [Interpreted as output
trigger] y y*
AH Feeds paper by a half page. [Interpreted as output
trigger] y y*
AP Deselects pen cap timeout setting y n
AR Plots a circle around a point specified by relative
coordinates. y y y
AS Specifies the pen acceleration. y n
AT Plots an arc linking three points specified by absolute
coordinates. (start point - intermediate point - end
point) y y
BL Enters a specified character string into a buffer. y y
BP
Instructs the start of plotting. Outputs a label by
overlaying on job log and plot output. y y