manualshive.com logo in svg

Xerox Wide Format 6050, User Manual

Share
Download
Xerox Wide Format 6050 User Manual Download Page 255

Message List

This section explains messages that may be displayed during printing using the 

lpr command. These messages depend on the system because they are output 

from the client workstation.

Status: The lpd daemon on the client failed to create a control file.

Action: Check the spool directory.

Status: The data is too large to store in the spool directory.

Action: Extend the spool directory area or attach the [-s] flag, then execute the lpr 

command using a symbolic link.

Status: Cannot start the lpd daemon on the client.

Action: Restart the daemon by the lpr command.

Status: The queue is stopped.

Action: Restart the daemon by the lpr command.

Status: A printer that is not registered in the system was specified.

Action: Check the printer registration in the [/etc/printcap] file.

Status: Failed to delete job No.XX in the print service queue.

Action: Check by the lpq command whether the specified job has already changed 

from the wait status in the queue to the processing status.

Cannot create /usr/spool/pltXXX/.seq

Copy file is too large

XXprinter:Jobs queued, but cannot start daemon

XXprinter:Printer queue is disabled

XXprinter:Unknown printer

jobXX can not dequeue

Summary of Contents for Wide Format 6050

















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands