Xerox Wide Format 6050 User Manual Download

Page: 189 / 304

Cancel and Change the Priority of Jobs

Use this procedure to cancel a print job or change its priority.

Procedure

Start Print Services on Web, log on as Administrator, and select the [Job and

Log] tab.

Select [Job not completed].

A list of all jobs that are printing and queued will display on the right side of the

screen.

•

These procedures can only be performed from the Administrator Page.

•

Completed jobs cannot be canceled or have their priority changed.

Refer to 2.3 Print Services on Web for details on starting up Print Services on

Web.

Summary of Contents for Wide Format 6050

















































































































































































































































































































Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands

Xerox Wide Format 6050, User Manual

Search results

Summary of Contents for Wide Format 6050

Reviews:

Related manuals for Wide Format 6050

Brands by name

Popular brands