Xerox Wide Format 6050, User Manual

Page: 285 / 304

CA Sets an auxiliary character set. y y
CC Specifies character smoothness. y n
CF Specifies an outline font rendering method. y n
CI
Plots a circle of an arbitrary radius. y y y
CM Specifies the handling of character set modes and
undefined characters. y n
CP Draws a character. y y y
CR Sets an RGB data range. y y
CS
Sets a standard character set. y y
CT Specifies an arc division method. y y y
CV
Controls the curve line generator. y n
DC Terminates the digitize mode. y y n
DF
Resets the printer to the default status. y y y
DI Specifies the character string direction by absolute
values. y y y
DL
Downloads a user-defined character set. y y
DP Reads the coordinates of a point to be digitized. y y n
DR
Specifies the character string direction by relative
values. y y y
DS Sets a character set to a slot. y n
DT
Defines character or code to terminate label drawing. y y y
DV Specifies a text path to the right or left or upward or
downward. y y y
EA Draws a square determined by the current pen
position and the specified X and Y coordinates. y y y
EC
Cuts paper. y y n
EP Draws a polygon registered in the polygon buffer. y y y
ER Draws a square determined by the current pen
position and relative coordinates from the point. y y y
ES Specifies the character spacing. y y y
EW
Draws a sector. y y y
FI Specifies a font as the primary font. y n
FN Specifies a font as the secondary font. y n
Com-
mand
Command Meaning and action HP-GL HP-GL/2
6030/6050
Wide Format