manualshive.com logo in svg

Xerox Wide Format 6050, User Manual

Share
Download
Xerox Wide Format 6050 User Manual Download Page 264

8.3

Other Problems

Follow the instructions provided in the table to recover from the errors which are listed.

Error

Recovery

Nothing is displayed on the 
printer control panel.

• Verify that the machine is connected to a correctly 

rated power supply, that the power plug is plugged 
in, and that the power switches and the circuit 
breaker switch are in the On positions.

• Adjust the contrast of the touch screen.

It is not possible to insert 
documents

• Check the printer control panel for error messages or 

error codes.

• Perform the corrective measures indicated on the 

control panels.

• If the condition does not improve, contact your 

Service Representative.

Media jams occur frequently

• Check for and remove loose pieces of media from 

inside the machine.

• Verify that the media is not curled, folded, wrinkled, 

or torn. Replace the media if any of these conditions 
apply.

• Verify that the media is loaded correctly. Reload the 

media if necessary.

• Verify that suitable media is being used. Only use 

paper recommended by your Service Representative.

Summary of Contents for Wide Format 6050

















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands