Xerox WC PE120 Series User Manual Download Page 262

Page: 262 / 283

Installing Machine Options

Installing Memory DIMM

Your machine has a dual in-line memory module (DIMM) slot.

Use this DIMM slot to install more memory option for the

machine.

OTE

: Your machine has 32 MB of memory which can be

expanded to 160 MB. Use only a Xerox-approved DIMM. Contact

your Xerox dealer.

AUTION

: Static electricity can damage DIMMs. When handling a

DIMM, either wear an antistatic wrist strap, or frequently touch the

surface of the DIMM antistatic package and then touch bare metal

on the machine.

Turn the machine off and unplug all cables and the power
cord from the machine.

Hold the control board cover and remove it.

Completely open the latches on each side of the DIMM slot.

Summary of Contents for WC PE120 Series




























































































































































































































































































Search results

Summary of Contents for WC PE120 Series

Reviews:

Related manuals for WC PE120 Series

Brands by name

Popular brands

Xerox WC PE120 Series, User Manual

Search results

Summary of Contents for WC PE120 Series

Reviews:

Related manuals for WC PE120 Series

Brands by name

Popular brands