Xerox WC PE120 Series User Manual Download Page 217

Page: 217 / 283

Using USB Flash Drive

10.3

To install a USB flash drive, insert it into the USB port in the front

of your machine.

Once you have installed the USB flash drive, you can

immediately print files stored on it.

Scanning to USB Flash Drive

You can scan a document and save the scanned image on the

USB flash drive. There are two ways of doing this: you can scan

to the USB flash drive using the default settings, or you can

manually select your own settings.

Scan to USB supports:
• PDF (300 dpi Mono)
• TIFF (300 dpi Mono)
• JPEG (200 dpi Color)
• BMP (300 dpi Mono, 300 dpi Gray, 300 dpi Color)

Scanning With Default Settings

Load the document face up into the ADF.

Place a single document face down on the document glass.

For details about loading a document, see page 7.6.

Summary of Contents for WC PE120 Series




























































































































































































































































































Search results

Summary of Contents for WC PE120 Series

Reviews:

Related manuals for WC PE120 Series

Brands by name

Popular brands

Xerox WC PE120 Series, User Manual

Search results

Summary of Contents for WC PE120 Series

Reviews:

Related manuals for WC PE120 Series

Brands by name

Popular brands