Xerox WC PE120 Series User Manual Download Page 28

Page: 28 / 283

Getting Started

2.2

Setting Up Your Machine

Unpacking

Remove the machine and all accessories from the packing
carton. Make sure that the machine has been packed with

the following items:

OTES

• The appearance of the power cord and the telephone line cord

may differ depending on your country’s specifications.

• The CD-ROMs contains the Xerox printer driver, Scan drivers,

ControlCentre, the User’s Guide, and the Adobe Acrobat Reader

program.

• For the WorkCentre PE120i, the PS Driver CD-ROM is supplied

with your machine.

• You should use the telephone line cord which is supplied with

your machine. If you are replacing it with another vendor’s, it

should be AWG #26 or lower gauge.

• Power cord must be plugged into a grounded power socket.

Summary of Contents for WC PE120 Series




























































































































































































































































































Search results

Summary of Contents for WC PE120 Series

Reviews:

Related manuals for WC PE120 Series

Brands by name

Popular brands

Xerox WC PE120 Series, User Manual

Search results

Summary of Contents for WC PE120 Series

Reviews:

Related manuals for WC PE120 Series

Brands by name

Popular brands