Xerox WC PE120 Series User Manual Download Page 38

Page: 38 / 283

Getting Started

2.12

Connecting a Printer Cable

For Local Printing

To print from your computer in a local environment, you need to

connect your machine to a computer with either a Universal

Serial Bus (USB) cable or a parallel cable.

OTE

You only need to connect one of the cables mentioned

above. Do not use the parallel and the USB cables at the same

time.

Using a USB Cable

OTE

If you are using a USB cable, you must be running

Windows 98/Me/2000/XP, or Machintosh with OS 10.1~10.3

(WorkCentre PE120i only).

Make sure that both the machine and the computer are
turned off.

Connect a USB cable to the USB connector on your
machine.

Connect the other end of the cable to the USB port on your
computer.

Summary of Contents for WC PE120 Series




























































































































































































































































































Search results

Summary of Contents for WC PE120 Series

Reviews:

Related manuals for WC PE120 Series

Brands by name

Popular brands

Xerox WC PE120 Series, User Manual

Search results

Summary of Contents for WC PE120 Series

Reviews:

Related manuals for WC PE120 Series

Brands by name

Popular brands