Xerox WC PE120 Series User Manual Download Page 170

Page: 170 / 283

Maintenance

8.4

AUTIONS

• To prevent damage to the toner cartridge, do not expose it to

light for more than a few minutes. Cover it with a piece of paper,

if necessary.

• Do not touch the green underside of the toner cartridge. Use the

handle on the cartridge to avoid touching this area.

With a dry lint-free cloth, wipe away any dust and spilled
toner from the toner cartridge area and the toner cartridge

cavity.

AUTION

: Do not touch the black transfer roller inside the

machine.

Locate the long strip of glass (LSU) inside the top of the
cartridge compartment, and gently swab the glass to see if

dirt turns the white cotton black.

Reinsert the toner cartridge and close the door.

Plug in the power cord and turn the machine on.

Summary of Contents for WC PE120 Series




























































































































































































































































































Search results

Summary of Contents for WC PE120 Series

Reviews:

Related manuals for WC PE120 Series

Brands by name

Popular brands

Xerox WC PE120 Series, User Manual

Search results

Summary of Contents for WC PE120 Series

Reviews:

Related manuals for WC PE120 Series

Brands by name

Popular brands