Xerox WC PE120 Series User Manual Download Page 92

Page: 92 / 283

Printing Tasks

4.14

Click

Save

To use a saved setting, select it from the

Favorites

drop-down

list.

To delete a favorite setting item, select it from the list and click

Delete

You can also restore the printer driver’s default settings by

selecting

Printer Default

from the list.

Using Help

Your machine has a help screen that can be activated using the

Help

button in the printer properties window. The help screen

gives detailed information about the printer features provided

by the printer driver.

You can also click

in the upper right hand corner, and then

click on any setting.

Summary of Contents for WC PE120 Series




























































































































































































































































































Search results

Summary of Contents for WC PE120 Series

Reviews:

Related manuals for WC PE120 Series

Brands by name

Popular brands

Xerox WC PE120 Series, User Manual

Search results

Summary of Contents for WC PE120 Series

Reviews:

Related manuals for WC PE120 Series

Brands by name

Popular brands