Xerox WC PE120 Series User Manual Download Page 114

Page: 114 / 283

Copying

5.10

Clone Copying

This special copy feature can be applied only when you place a

document on the document glass. If a document is detected in

the ADF, Clone copying feature does not work.

Place the document to be copied on the document glass,
and close the cover.

Press

More Features

Press

More Features

or the scroll button (

) until

“Clone” displays on the bottom line.

Press

Enter

to make your selection.

If necessary, customize the copy settings, including
number of copies, darkness, and original type, by using the

control panel buttons. See “Setting Copy Options” on

page 5.7.

OTE

: You cannot adjust the copy size using the

Reduce/

Enlarge

button while making a clone copy.

Press

Start

begin copying.

Collation Copying

This special copy feature is available only when you load

documents in the ADF.

Load the documents to be copied in the ADF.

Press

More Features

Press

More Features

or the scroll button (

) until

“Copy Collate” displays on the bottom line.

Press

Enter

to make your selection.

If necessary, customize the copy settings, including
number of copies, darkness, and original type, by using the

control panel buttons. See “Setting Copy Options” on

page 5.7.

Press

Start

to begin copying.

Summary of Contents for WC PE120 Series




























































































































































































































































































Search results

Summary of Contents for WC PE120 Series

Reviews:

Related manuals for WC PE120 Series

Brands by name

Popular brands

Xerox WC PE120 Series, User Manual

Search results

Summary of Contents for WC PE120 Series

Reviews:

Related manuals for WC PE120 Series

Brands by name

Popular brands