Xerox FAX System (J), Operation Manual

Page: 88 / 204

Section 5 Other Features of this Fax
5-6
Remote Switching lets you initiate fax reception from a telephone that is connected to this fax machine. This function is thus convenient if you
want to be able to initiate fax reception from a location separate from the fax machine itself.
* Remote Switching is only possible if a separately purchased telephone with tone dialing capabilities is connected to this fax machine. Even if
the phone you use has tone dialing capabilities, depending upon the model of the phone, this function may not work as expected. For further
information, contact your service representative, an authorized service center or the place or purchase.
Changing the Remote Switching
Number
The factory default setting for the Remote Switching Number is
“55”, but you can change this if you want.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
Press the “Register” key. The Registration Select screen
will appear.
(inch)
(metric)
Press the “Remote SW dial” key. Remote Switching
registration is now possible.
(inch)
(metric)
Use the keypad to enter the new Remote Switching
Number
(2 digits).
* If you want to change the entered number, use the “
”
and/or “ ” keys to move the cursor to the desired
location.
* If you want to reset the displayed number to “00”,
simply press the Stop/Clear key.
(inch)
(metric)
Press the “Confirm” key. Registration of the new Remote
Reception Number is complete.
If you are finished making settings, press the Reset key.
Initiating Fax Reception From A Connected Telephone (Remote Switching)
1
2
3
4
5