Xerox FAX System (J), Operation Manual

Page: 78 / 204

Section 4 Troubleshooting
4-4
“Communication Error” An error has occurred during a fax transmission or fax reception. Check the error code – that
indicates the origin of the error – on the corresponding Transmission Report (or Reception
Report) that is printed out in order to confirm the cause of the error.
10-7
“No DC Loop”
“No Dial Tone” The modular cord may not be connected properly to either the telephone or the line jack (L)
on the fax. Either that, or there is a problem with the telephone line. In this case, contact
your telephone company.
______
“No Response” Dialing was accomplished, but connection to the other party was not possible. Check with the
other party.
______
“No encryption code is
registered.” The destination was dialed using a one-touch key that was designated for Encrypted
Transmission, but the Encrypted Transmission was not possible because the corresponding
Encryption Key is no longer registered in your fax.
5-48
5-56
Message Procedure Page