Xerox FAX System (J), Operation Manual

Page: 157 / 204

Section 7 Various Settings and Registration
7-5
The volume of the alarm, the monitor and the speaker can be adjusted here, or you can make the alarm inaudible.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
Press the Default key. The Default Setting screen will
appear.
Press the “Fax default” key.
(inch)
(metric)
Press the “ T ” cursor key until “Set Volume” [“Set the
sound volume”] is highlighted.
Press the “Change #” key.
Select the desired alarm volume from among “Large”,
“Small” and “Off”.
(inch)
(metric)
Select the desired monitor volume from among “Large”,
“Medium”, “Small” and “Off”.
Select the desired speaker volume from among “Large”,
“Medium”, “Small” and “Off”.
Press the “Close” key. If you are finished making settings,
press the Reset key to return to the initial mode.
Making Volume Settings (Volume setting)
<Alarm Volume>
Sets the volume of the alarm that sounds in the event of an
error or when you press an incorrect key on the operation
panel.
<Monitor Volume>
Sets the volume of the internal speaker that allows you to
listen to conditions on the telephone line when the “On-hook”
key was NOT pressed.
<Speaker Volume>
Sets the volume of the internal speaker that allows you to
listen to conditions on the telephone line when the “On-hook”
key WAS pressed.
1
2
3
4
5
6
7
8