Xerox 255 DC, Reference Manual

Page: 137 / 322

Xerox Document Centre Reference Guide Page 9 - 11
9. T
ool
s
System Tools
Paper Management System
The Document Centre tracks the attributes of the paper in each tray
either automatically, or through user programming or a combination
of both. Each tray can be
Dedicated to a specific type of stock, made
Fully Adjustable by all users or, on a DC model machine, adjustable
by Size Only based on the needs of your environment.
Paper Attributes
The Document Centre allows four attributes to be programmed at
the machine. These attributes include:
l
Size - This is the physical dimensions of the media. The
machine will automatically detect this.
l Orientation - Paper will be fed into the machine either Long
Edge Feed (LEF) or Short Edge Feed (SEF). The machine
will automatically detect this.
l
Color - The color of the paper stock loaded in the tray (e.g.
red, yellow, or clear).
l Type - Describes exactly what type of media is loaded in the
tray (e.g. letterhead, hole-punched, or transparencies).
Tray Settings
In a Dedicated tray the Machine Administrator assigns the size ,
orientation , color and type of the tray contents. These selections are
only changeable by someone with Machine Administrator access.
When a
Dedicated tray is opened, a pop-up screen will inform the
user which specific paper must be used in the tray.
In a Fully Adjustable tray the size , orientation , color, and type of the
tray contents must be programmed by the user. Each time the tray is
closed, the user must confirm the tray contents.
In a Size Only tray, available only on the DC Model, the user can
adjust size and orientation of the stock. The tray will function just
like those in typical light lens copiers. Type and color are assumed
to be the default stock.