Xerox 255 DC Reference Manual Download Page 43

Page: 43 / 322

Xerox Document Centre Reference Guide

Page 3 - 9

3. Pr

oduc

Over

User Interface

The User Interface is divided into four major categories:

Touch

Screen

Pathway buttons

Keypad

, and

Feature buttons

1. The

Touch Screen

allows users to view, program, and select the

options, features, and functions that are available in the various
pathways. Touch the screen to activate a feature.

2. There are three

Pathway

buttons that enable the access to the

primary machine functions and features.

Features

: Allows you to program copy, fax, and scan jobs.

For more details, refer to the chapters pertaining to these
functions.

Job Status

: Allows you to view and manage jobs that are or

have been queued into the system. Refer to

Chapter 7, Job

Status,

for more detailed information.

Machine Status

: Provides information pertaining to

machine faults, how to contact Xerox, and supplies. Refer to

Chapter 8, Machine Status,

for more detailed information.

3. The

Power Saver Indicator Light

, when lit, indicates that the

Power Saver

feature is active. Touch any key or the

Touch

Screen

to exit this mode.

4. The

Keypad

is used to input specific values and includes a

Clear

(C)

button to clear your last entry, and a

Dial Pause

button,

which is used for the on-line support link feature.

Keypad

Feature

Touch

Pathway

Screen

Buttons

Power Saver

Indicator Light

Summary of Contents for 255 DC



































































































































































































































































































































Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands

Xerox 255 DC, Reference Manual

Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands