Xerox 255 DC Reference Manual Download Page 32

Page: 32 / 322

Page 2 - 4

Xerox Document Centre Reference Guide

Information Sources

Use the following information sources to answer your questions.

At the Machine

Labels

are affixed at points of need throughout the system.

They depict information about loading originals or paper stock.

Green or Gold colored areas

Gold colored areas

typically indicate the handle or levers to

push or pull when removing Replaceable Modules or Cartridges.

Green colored areas

are where you clear jams.

The

User Interface Touch Screen

displays important messages

about the status of the machine.

The

User Guide

provides information and instructions about

using the features of the machine to perform copying tasks.

The

Help

system provides you point-of-need information.

At the Workstation (for ST Models)

The

Quick Start Guide for Printing

contains easy-to-use and

helpful information.

The

CentreWare Help System

is available by clicking on the

help button on the Print Driver.

Used by the Machine Administrator

The

Reference Guide

provides detailed information about all

features and settings as well as maintenance.

The Personal Learning Program

is designed to help train new

users by providing interactive training on copying and
maintenance tasks. It also includes a computer-based simulation
of copying tasks that can be practiced at a computer
workstation.

Summary of Contents for 255 DC



































































































































































































































































































































Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands

Xerox 255 DC, Reference Manual

Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands