Xerox 255 DC Reference Manual Download Page 252

Page: 252 / 322

Page 12 - 26

Xerox Document Centre Reference Guide

Material Safety Data Sheets

XEROX

Material Safety Data Sheet

MSDS No:

D-0403A

Date:

2/18/83

Revision:

9/30/96

Manufacturer:

Xerox Corporation

Telephone # (s):

Rochester, NY 14644

Safety Information:

(800) 828-6571

Health Emergency:

(716) 422-2177

Transportation Emergency:

(716) 422-1230

Section I - Product Identification

Trade Names/Synonyms:

Platen Glass, Lens and Mirror Cleaner

Part No.:

43P81, 8R3669

Chemical Name:

None

WHMIS Status:

Class B/Div. 2, Flammable liquid and Class D, Div. 2B, Toxic

Ingredients (% by wt.)

CAS No.

Ethyl alcohol (75-85%)

64-17-5

Isopropanol alcohol (5-15%)

67-63-0

Water (5-10%)

7732-18-5

Section II - Emergency and First Aid

Primary Route of Entry:

Symptoms of Overexposure:

Inhalation

Central nervous system depression,
respiratory distress, and gastrointestinal irritation.

Eyes:

Flush thoroughly with water.

Skin:

Medical Conditions Generally Aggravated

Wash thoroughly with soap and water

by Exposure:

Inhalation:

None when used as described by product literature.

Remove from exposure.

Ingestion:

Additional Information:

Dilute stomach contents

None.

with several glasses of water.

Section III - Toxicology and Health Information

This material has been evaluated by Xerox Corporation.

Oral LD

>21 g/kg (rats) practically non-toxic.

TLV:

1000 ppm (ethyl alcohol)

Dermal LD

>20 g/kg (rabbits) practically non-toxic.

400 ppm (isopropyl alcohol)

Inhalation LC

N.D.

PEL:

1000 ppm (ethyl alcohol)

Eye Irritation:

Irritant

400 ppm (isopropyl alcohol)

Skin Sensitization:

Not a sensitizer.

STEL:

500 ppm (isopropyl alcohol)

Skin Irritation:

Not an irritant.

Ceiling:

N.E.

Human Patch:

Non-irritating, non-sensitizing.

XEL

N.E.

Summary of Contents for 255 DC



































































































































































































































































































































Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands

Xerox 255 DC, Reference Manual

Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands