Xerox 255 DC, Reference Manual

Page: 83 / 322

Xerox Document Centre Reference Guide Page 4 - 35
4. M
aki
ng C
o
p
ies
Stored Programming
This feature allows you to program up to 10 programming
sequences. This feature is helpful to store commonly used selections
or combinations of selections such as
Edge Erase and Bound
Originals .
To use this feature, use the up and down scroll buttons on the
scrolling list to select the desired storage location, then press a
function button -
Store or Recall Programming .
Use the Store Programming feature to store the current
programming selection. A confirmation message will ask you if you
want to overwrite the existing programming in that location. If you
choose to overwrite, the new programming will be stored in that
location.
Every time you use this, a confirmation message will be displayed.
Use the Recall Programming feature to retrieve past programming
that has been stored in a selected location. First, select a Job
Number, then press the
Recall Programming button. The recalled
programming will overwrite the current copy programming. After
being recalled, the selections can be modified further.
Check your programming values when applying stored
programming values to a
Build Job segment. Some stored
programming, such as Multi-Up , cannot be recalled in the middle of
a Build Job segment.