Xerox 255 DC Reference Manual Download Page 140

Page: 140 / 322

Page 9 - 14

Xerox Document Centre Reference Guide

Tray Priority Settings

The window in this input region will accept values from 1 (highest
priority) to 99 (lowest priority).

The tray

Priority

setting performs two functions.

It determines which tray will be used when two trays are loaded
with the same paper and

Auto Paper

is selected. The tray with

the highest priority that contains the selected stock with the
default type and color will be the tray that is used.

It also determines which paper trays are displayed on the

Basic

Copying Tab

as indicated below. The trays with the highest

priority (lowest number) will be displayed.

Auto Selection

This selection enables the Auto Tray Switching feature which makes
the tray and its pre-programmed contents available when

Auto

Paper

is selected at the machine or a tray is selected in the Print

Driver.

Disabling this option makes a tray unavailable for Auto Tray
Switching.

Copy Jobs.

Auto Tray Switching will only work when the

Auto

Paper

option is selected and the job requires the system default size

and color. For more information on setting the default size and color
refer to page 9-16.

Print Jobs

(ST models only)

Print Job Auto Tray Switching differs

slightly in that it will complete a print job as long as another tray has
the same stock as the initially selected tray.

Lowest

Highest

Priority

determines which trays

appear in these locations

Trays with the highest priority will
appear on

Basic Copying Tab

Summary of Contents for 255 DC



































































































































































































































































































































Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands

Xerox 255 DC, Reference Manual

Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands