Xerox 255 DC Reference Manual Download Page 196

Page: 196 / 322

Page 10 - 14

Xerox Document Centre Reference Guide

Changing the Tools password

It is strongly recommended that you change the password that
initially comes with the machine (1111). Follow these steps to
change the password:

1. Select

Access

and enter

Tools

using the default password, 1111.

2. Press

Auditron Administration

3. Press the

Tools Mode Access

button.

4. Select the User Number field by touching the User Number area.

When the background is black the new User Number can be
entered. Use the keypad to enter a new User Number. Record the
User Number.

5. Press the

Close

button.

6. Exit

Tools.

7. Validate the new password by re-entering

Tools,

using the new

password. If you are not successful, contact the Welcome
Center.

NOTE

The default User Number for User Account 1 is 1111. It is reserved
for Account 1 and cannot be assigned as a User Number for any
other account.

Summary of Contents for 255 DC



































































































































































































































































































































Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands

Xerox 255 DC, Reference Manual

Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands