Xerox 255 DC Reference Manual Download Page 287

Page: 287 / 322

Xerox Document Centre Reference Guide

Page 14 - 11

14. Machi

Mai

nance

Document Feeder

Cleaning the Document Feeder routinely will help prevent misfeeds.
The cleaning procedure is:

Dampen one end of a towel with Xerox Lens and Mirror
Cleaner (8R3669).

Open the Document Scanner Top Cover. Clean the rolls and all
visible, black-colored surfaces.

Close the Document Scanner Top Cover and raise the
Document Feeder. Clean the rolls and all visible, black-colored
surfaces.

Clean both sides of the Document Glass as described
previously. Repeat as required.

Ensure that the Feed Rolls are dry before you use the machine.

User Interface and User Interface Touch Screen

Clean the User Interface with a lint-free cloth dampened with
common household cleaner or Xerox Lens and Mirror Cleaner and
wipe.

Summary of Contents for 255 DC



































































































































































































































































































































Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands

Xerox 255 DC, Reference Manual

Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands