Xerox 255 DC Reference Manual Download Page 27

Page: 27 / 322

Xerox Document Centre Reference Guide

Page 1 - 7

1. Sa

tes

. S

Never Do These

Never

use an adapter plug to connect equipment to a power

source that lacks a ground connection terminal.

Never

obstruct ventilation openings. They are provided to

prevent overheating.

Never

push objects of any kind into the ventilation openings.

Never

attempt any maintenance function that is not specifically

described in the Document Centre documentation.

Never

remove any covers or guards that are fastened with

screws. There are no operator serviceable areas within these
covers.

Never

position the machine near a radiator or any other heat

source.

Never

override or “cheat” any of the electrical or mechanical

interlock devices.

Never

operate the equipment if you notice unusual noises or

odors. Disconnect the power cord from the power outlet and
call the Xerox Welcome Center.

Summary of Contents for 255 DC



































































































































































































































































































































Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands

Xerox 255 DC, Reference Manual

Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands