Xerox 255 DC Reference Manual Download Page 243

Page: 243 / 322

Xerox Document Centre Reference Guide

Page 12 - 17

12. Re

fer

ence

Document
Scanner Size
Sensing

Zones 1 to 6

12 Zones

< = less than
> = greater than

Zone 1

A= < 9 in.

B= < 7.6 in.

5.5 x 8.5 in.(SEF)

Zone 2

A= 9-12.8 in.

B= < 7.6 in.

7.25 x 10.5 in.
(SEF)

Zone 3

A= >12.8 in.

B= < 7.6 in.

7.25 x 10.5 in.
(SEF)

Zone 4

A= <9 in.

B= 7.6 - 9.2 in.

8.5 x 5.5 in. (LEF)

Zone 5

A= 9-12.8 in.

B= 7.6 - 9.2 in.

8.5 x 11 in. (SEF)

Zone 6

A=>12.8 in.

B= 7.6 - 9.2 in.

8.5 x 14 in. (SEF)

The Document Feeder senses
the paper size and, using 12
size zones, will pick a paper
size corresponding to the size
it detects. Each of these zones
have unique width and length
dimensions, represented by the
letters

and

below.

If an original is fed through the
Document Feeder and does not
correspond to an existing zone,
image loss or black edges may
occur.

Each zone can be redefined,
using following the procedure.

Table 8: System Settings Defaults

Feature Area

Options

Factory Default

Explanation and Notes

Document Feeder

Summary of Contents for 255 DC



































































































































































































































































































































Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands

Xerox 255 DC, Reference Manual

Search results

Summary of Contents for 255 DC

Reviews:

Related manuals for 255 DC

Brands by name

Popular brands