Xante AW 1200, User Manual

Page: 52 / 169

2-20 – Macintosh: Installing Utilities and Drivers
FONTSAMP.PS3 prints samples of Adobe PostScript 3 fonts resident on XANTÉ
PostScript 3 printers.
FTP.PS prints instructions for uploading and downloading files to XANTÉ’s FTP (File
Transfer Protocol) site.
INITDSK.PS file initializes the hard disk installed in your printer.
You must initialize a hard disk before it can be used to store downloaded fonts;
factory installed disks are already initialized and ready to be used. Initializing a disk
erases all information stored on the disk.
PARMDUMP.PS prints a list of settings for communication devices currently
configured for your printer.
PRNIPSUB.PS prints IP parameters including the IP address, subnet mask, and
default gateway.
SETIP.PS allows you to set your printer’s IP address. Open the file in a text editor,
such as SimpleText, and change the IP address in the parentheses to your printer’s IP
address. Save and download the file to your printer. Restart the printer to make the
change effective.
SETIPSUB.PS allows you to modify the IP address, subnet mask, and default gateway.
SETNAME.PS allows you to change the printer’s name.
SETZONE.PS allows you to set your printer’s EtherTalk zone name. Open the file in a
text editor, such as SimpleText, and change “name of zone” in the parentheses to the
name of your EtherTalk zone. Save the file and download it to your printer. Restart the
printer to make the change effective.
STARTPG.OFF disables the printer’s start-up page feature, preventing the page from
printing automatically each time the printer is restarted.
STARTPG.ON enables the printer’s start-up page feature, causing the page to print
automatically each time the printer is restarted.
STARTPG.PS allows you to print the printer’s start-up page.
SYSPARM.PS prints a list of current system parameters.