Xante AW 1200, User Manual

Page: 113 / 169

Printing on Various Media and Options – 6-21
c. Replace the 4 screws to secure the controller board to the printer (fig.
6.28).
Fig. 6.28 Replace Controller Board Screws Fig. 6.29 Replace Parallel Interface Screws
d. Replace the 2 metal screws to secure the parallel interface in place (fig.
6.29).
e. Reattach the MCTRL (fig. 6.30) and LED (fig. 6.31) cables by gently
lowering their cable ends straight down into their respective controller
board connectors.
Make sure that the LED cable’s metal contacts touch the printer connector’s metal
contacts as you lower the cable straight down into its connector (fig. 6.31).
Fig. 6.30 Reconnect MCTRL Cable Fig. 6.31 Reconnect LED Cable