Xante AW 1200, User Manual

Page: 159 / 169

1-12 – Introduction and Installation
Shake the cartridge enough to free any compacted toner. Turning on the printer with
toner still compacted may damage the cartridge.
5. Place the cartridge on a flat surface; then, remove the shutter packing tape by
pulling it down from the top (fig. 1.15).
Fig. 1.15 Remove Shutter Packing Tape Fig. 1.16 Remove Sealing Tape
6. Grasp the sealing tape’s end and pull the tape straight out (fig. 1.16).
If the tape is pulled out at an angle, it may break off in the cartridge. If the tape is not fully
removed (approx. 27" [70 cm] long), it will reduce print quality and damage the printer.
7. Align the cartridge’s side ridges with the guide channels in the printer (fig.
1.17). Then, gently slide the cartridge into the printer until it clicks into place.
Fig. 1.17 Align and Insert Cartridge Fig. 1.18 Close Top Cover
8. Close the top cover (fig. 1.18) and then the front cover (fig. 1.19), making sure
both snap into place.