44
Nowyj 15,0L
Potertyj 3,9L
Wspomagat. Pust.
Tip ATF 30C
• При помощи выберите и перейдите в меню
замены масла - ATF EXCHANCE при помощи
клавиши .
•Zamiena masla
Wospolnenie masla
Sliw masla
Dobawlit dobawku
• Введите количество жидкости, которое
необходимо заменить, используя после ввода,
нажмите клавишу .
Zamiena masla
Koliczestwo:
10,0L
Наличие минимального количества новой
жидкости в емкости для новой жидкости
обеспечивает немедленное включение насоса
ТранСерва, предотвращая попадание пузырьков
воздуха в систему. Если в баке не достаточно
нового масла для замены, на дисплее появится
сообщения об ошибке.
Pozalujsta prowierte
Urowien zidkosti
• После того как Вы проверили уровень масла,
нажмите кнопку . На экране возникнет
следующее сообщение (залейте присадку или
нажмите клавишу отмены):
Wlejte dobawku dlia
oczistki ili ESC
cztoby annulirowat
• Если вы выберете ESC (длительное нажатие
кнопки ), пожалуйста, выполните действия,
описанные в “4.5 - Замена масла АТФ - Режим
Замены” на страницу 45.
4.4. Замена масла АТФ
- Чистящая присадка–
Wynn’s Automatic
Transmission Flush
• Для добавления чистящей
присадки в ТранСерв, снимите
крышку бака для присадок,
залейте присадку и нажмите
клавишу .
⚠
Сколько чистящей
присадки было добавлено
в бак для присадок, столько
же жидкости будет добавлено
в АКПП автомобиля (от 0 до
3 литров). Цикл промывки
продолжается в течение 10
минут.
⚠
Очень важно чтобы
механик проводящий
замену масла, находился в
автомобиле и во время режима
промывки переключал коробку
по всем передачам P – R –
N – D – S задерживаясь на
каждой передаче по 10 секунд.
Переключение передач в АКПП
должно продолжаться в течение
всего цикла очистки АКПП (10
минут).
⚠
За исключением процедур
по добавлению масла
или защищающих присадок,
ТранСерв не запустится, пока
температура присадки не
достигнет 40 °C.
Maslo cholodnoje
podogrew
• Нажмите .
30C
Podozdite na zidkost
dlia rozgoriwania...
После подогрева, ТранСерв начнет процедуру
добавления присадки, при этом на экране
отобразится следующее сообщение:
Dobawka
ПРИМЕЧАНИЕ: При добавлении присадок
ТранСерв учитывает количество присадки
находящейся в подающем шланге, это
необходимо для контроля количества
добавленной присадки.
Nowyj 13,5L
Potertyj 1,0L
†0,0L Komp. 0,1L
• Процесс очистки запускается и продолжается
в течение 10 минут. ВО время процесса очистки