17
message:
Used Fluid Tank
Please Wait...00:09
At the end of the operation the following message is shown:
CYCLE COMPLETED.
• Long press .
6. Maintenance
6.1. Fluid filter maintenance
After 30 complete transmission fluid change operations, the two filters
housed inside the unit should be replaced. The number of fluid change
operations performed by the TranSERVE® is printed on the docket.
NOTE: Use original filters (10 micron filter cartridge, part number
WF4350).
6.2. Replacing printer paper
To change the paper roll, proceed as follows:
• Open the printer panel as shown in figure 1;
• Position the paper roll and ensure that the
paper unrolls in the right direction as shown in figure 2;
• Pull out some of the paper as shown in figure 3 and close the panel;
• The printer is ready.
7. Warranty
The TranSERVE® has been thoroughly tested before shipping. This
guarantee covers all manufacturing and material defects for 2 years from
the delivery date and only covers all parts and labour costs. Shipping costs
will be extra to the customer. This Guarantee is not valid if the TranSERVE®
has been tampered with prior to returning it to Wynn’s for inspection or
when the instructions for use have not been followed. Damages due to
overloading, improper use, application of unauthorised products, shocks,
accidents, use of the machine for other purposes than described in this
manual are all excluded from the guarantee. The TranSERVE® can be
locally repaired following written consent by Wynn’s Belgium. In case
of a complaint please also send a copy of the purchase invoice. It is also
important to indicate the serial number of the apparatus on the invoice.
Figure 4
Figure 3
Figure 2
Figure 1
