Woodward MicroNet TMR 5009, Installation/Hardware Manual

Page: 97 / 118

Manual 85580V2 5009 Installation/Hardware
Woodward 89
Proximity Probe Input Ratings
Input frequency: 0.5–25 000 Hz
Input amplitude: 3.5–32 Vdc input to the module
Available power: 12 V or 24 V, 50 mA maximum
Isolation:
Channel to Channel
0 Vrms
To Chassis 200 Vdc continuous, 600 Vdc DWV
Resolution: dependent on frequency
Accuracy: software calibrated to 0.03%, minimum
24 V Protection: 24 V proximity probe power is fuse protected on the
ATM (100 mA fuse)
12 V Protection: 12V proximity probe power is limited to 100mA via a
regulator on the ATM
Time Stamping High & Low Alarms to 5 ms resolution
Analog Inputs (4–20 mA)
Number of channels: 8
Isolation:
Channel to Channel/
Channel to Common
–60 dB MMR, 200 Vdc common mode rejection voltage
To Chassis 200 Vdc continuous, 600 Vdc DWV; Combo
500 Vdc continuous, 600 Vdc DWV; HD
Input impedance: 200 Ω
Anti-aliasing filter: 2 poles at 10 ms
Resolution: 16 bits
Accuracy: software calibrated to 0.1%, minimum
Temp Drift: 275 ppm/°C, maximum
Fuse: 100 mA fuse per channel (See Figure 5-1)
Time Stamping: 5 ms resolution
Analog Outputs (4–20 mA)
Number of channels: 4
Driver: Pulse Width Modulated (PWM)
PWM frequency: 6.14 kHz
Filtering: three 500 ms poles
Current output: 4–20 mA
Isolation:
Channel to Channel
0 Vrms
To Chassis 200 Vdc continuous, 600 Vdc DWV; Combo
500 Vdc continuous, 600 Vdc DWV; HD
Max load resistance: 600 Ω
Current Readback: 10 bits
Resolution: 10 bits
Accuracy: software calibrated to 0.2%
Temperature Drift: 125 ppm/°C, maximum
Readback accuracy: 0.1%
Readback temp drift: 400 ppm/°C, worst case