Woodward MicroNet TMR 5009, Installation/Hardware Manual

Page: 21 / 118

Manual 85580V2 5009 Installation/Hardware
Woodward 13
Figure 2-9. SIO Module Block Diagram
Cabinet (optional)
If a cabinet is included with the system, a standard floor mount, front access
cabinet is provided. Input Power and field cable access are available through the
bottom of the cabinet. When a cabinet is included with a system, the control is
shipped fully assembled within the cabinet. The cabinet’s weight is approximately
600 lbs (272.4 kg) including control. The provided cabinet meets NEMA 12
ratings. Refer to Chapter 6 of this Volume for all Cabinet material specifications.
Refer to Figures 4-18a and 4-18b for control cabinet diagrams. This panel is a
UL Listed industrial control panel.
OpView™ Operator Interface (optional)
The OpView™ Operator Interface is a computer-based work-station that
functions as a touch screen annunciator and operator control panel for
Woodward digital control systems. This work-station allows an operator to
remotely view operating inputs, vary control setpoints, and issue Run mode
commands. The OpView is comprised of an industrialized (optional Class I
Division 2) touch screen hardware package and a Woodward developed
software program. This standard program allows the OpView to automatically
select the correct interface screens based on 5009 control’s configuration. No
field configuration is necessary. Refer to Table 3-1 and Figure 3-1 for
identification and Volume #4 of this manual for device specific details.