Woodward MicroNet TMR 5009, Installation/Hardware Manual

Page: 65 / 118

Manual 85580V2 5009 Installation/Hardware
Woodward 57
Control Wiring Diagrams
When installing a system, follow all I/O specific wiring notes (covered earlier in
this chapter) and general wiring notes below. For ease of identification system
notes are displayed within a triangle on each wiring diagram. The number that
appears in a triangle pertains to a wiring note. The subsequent sheets of the
plant wiring diagram each represent a field termination module or panel. Refer to
Table 3-1 and Figure 3-1 for device identification.
Wiring Notes
1 Refer to Table 4-1 for input power ratings.
2 Refer to Chapter 6 for input power ratings.
3 Customer supplied wiring.
4 Optional Wiring (dependent upon system options).
5 Read and follow all Wiring notes, instructions, and recommendations within
this chapter when electrically installing a system.
6 Confirm each connection before operating unit.
7 All analog inputs must be isolated from earth ground.
8 Follow authorized standards for conduit loading and sealing.
9 All wires to terminal blocks shall have wire markers, marked with
associated terminal number.