Woodward MicroNet TMR 5009, Installation/Hardware Manual

Page: 37 / 118

Manual 85580V2 5009 Installation/Hardware
Woodward 29
Install OpView™ Interface (if included)
Mount the OpView™ interface within the maximum cable length of RS-232
communications (15 m/50 ft) from the 5009 main unit, leaving adequate service
loop. A standard 10 ft (3 m) cable is provided with the system; optionally a longer
cable up to 15 m (50 ft) can be used.
Option 1—
1. Mark OpView mounting hole locations, taking care to leave sufficient space
between the OpView and walls, objects, etc. for easy access and adequate
air flow. See Figure 3-11. Reference PowerStation manual included for
further installation instructions.
2. Drill mounting holes per Figure 3-11.
3. Place the OpView in position, install 8-32 mounting nuts onto the studs, and
tighten them securely.
Figure 3-11. OpView Outline Drawing