manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Operating Instructions Manual, Page: 97 / 136

Share
Download
WÄRTSILÄ ELAC LAZ 5200 Operating Instructions Manual Download Page 97

R

efer to pr

otection

 notice ISO 16016

TH 52 614 8001 EN Rev. A 09/2018

Wärtsilä ELAC Nautik GmbH 

95 / 134

ELAC LAZ 5200 –  Operating Instructions

Operation

6.5.11.4.1 Selection of the Transmission Group for the Output

Select the transmission group for the output

Precondition:

The "NETWORK" menu is unlocked 

6.5.4.4.

6.5.11.4.2 Selection of the Standard Transmission Groups for the Input

Select the transmission groups for the input

Precondition:

The "NETWORK" menu is unlocked 

6.5.4.4.

The default setting is "NAVD".

Proceed as follows to select the transmis-
sion group:

1. Select menu item 

MAIN MENU > NET-

WORK > TX GROUPS > Output

 

.

2. Press the 

[ENTER]

 key.

3. Select the desired setting with the 

[CURSOR]

 keys (up or down).

4. Press the 

[ENTER]

 key to confirm the 

selection.

5. Reboot the device. 

6.5.3

Fig. 6.66: Selecting Transmission Group (Output)

The default setting for the transmission groups NAVD and TIME is "On". The default set-
ting for all other transmission groups is "Off".

Proceed as follows to select the transmis-
sion groups:

1. Navigate to the menu 

MAIN MENU > 

NETWORK > TX GROUPS > STAN-
DARD GROUPS

.

2. Select the desired menu item 

 and 

press the 

[ENTER]

 key.

3. Select the setting “On” with the 

[CUR-

SOR]

 keys (up or down).

4. Press the 

[ENTER]

 key to confirm the 

selection.

5. Repeat steps 2 to 4 to select further 

transmission groups.

6. Reboot the device 

6.5.3.

Fig. 6.67: Selecting Transmission Group (Input)

Summary of Contents for ELAC LAZ 5200









































































































































Reviews:

No comments