R
efer to pr
otection
notice ISO 16016
TH 52 614 8001 EN Rev. A 09/2018
Wärtsilä ELAC Nautik GmbH
91 / 134
ELAC LAZ 5200 – Operating Instructions
Operation
Configuring the channel
Precondition:
The "SYSTEM SETUP" menu is unlocked
Proceed as follows to configure a channel:
1. Navigate to the menu
MAIN MENU >
SYSTEM SETUP
and select the de-
sired channel
or
.
2. Press the
[ENTER]
key.
3. Select menu item “Along”
and press
the
[ENTER]
key.
4. Select the desired setting with the
[CURSOR]
keys (up or down) and con-
firm with the
[ENTER]
key.
5. Select menu item “Across”
and
press the
[ENTER]
key.
6. Select the desired setting with the
[CURSOR]
keys (up or down) and con-
firm with the
[ENTER]
key.
7. Select menu item “Model”
and press
the
[ENTER]
key.
8. Select the desired setting with the
[CURSOR]
keys (up or down) and con-
firm with the
[ENTER]
key.
Fig. 6.60: Configuring the Channel
A transducer must be configured for the depth detection to work, i. e. "none" must not
be set under "Model".
9. Select menu item “Trim”
and press
the
[ENTER]
key.
10. Set the desired value using the
[CUR-
SOR]
keys (up or down) and confirm
with the
[ENTER]
key.
11. Select menu item “Blocking depth”
and press the
[ENTER]
key.
12. Set the desired value using the
[CUR-
SOR]
keys (up or down) and confirm
with the
[ENTER]
key.
Fig. 6.61: Configuring the Channel
Summary of Contents for ELAC LAZ 5200
Page 2: ......