manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Operating Instructions Manual, Page: 58 / 136

Share
Download
WÄRTSILÄ ELAC LAZ 5200 Operating Instructions Manual Download Page 58

ELAC LAZ 5200 – Operating Instructions

Operation

56 / 134

Wärtsilä ELAC Nautik GmbH 

TH 52 614 8001 EN Rev. A 09/2018

R

efer to pr

otection

 notice ISO 16016

6.3.2.2.1

Representation of the Echo

Fig. 6.17: Representation of the Echo

The quality of the echo is represented with a colour scale. The displayed colour varies, 
depending on the condition of the sea bed.

•

The strongest echo is displayed in red

.

•

The weakest echo is displayed in blue

.

Item

Designation

Description

Scale of the depth measuring 

range

Display of the depth in the selected unit

Echo 

Graphic representation of the echo

Time scale

Time marks at intervals of one minute

Tab. 6.6: Representation of the Echo

The time marks are dependent on the system time and the set depth measuring range. 
If the time is changed or the depth measuring range changes, the distances between 
the time marks may vary.

Summary of Contents for ELAC LAZ 5200









































































































































Reviews:

No comments