WÄRTSILÄ ELAC LAZ 5200, Operating Instructions Manual, Page: 92 / 136

ELAC LAZ 5200 – Operating Instructions
Operation
90 / 134 Wärtsilä ELAC Nautik GmbH TH 52 614 8001 EN Rev. A 09/2018
R
efer to pr
otection
notice ISO 16016
6.5.11 Configuration
6.5.11.1 Configuration of a Channel
Depending on the variant, the Navigation Echo Sounder ELAC LAZ 5200 has one or two
channels. The parameters for the channels are set during commissioning of the Naviga-
tion Echo Sounder ELAC LAZ 5200 and may only be changed if modifications are made
to the system (e.g. changing of the transducer model).
The following parameters can be configured:
Designation Description
Along
Installation position of the transducer in
longitudinal direction
The following settings are available:
• Aft
• Center
• Bow
Across
Installation position of the transducer in
transverse direction
The following settings are available:
• Starboard
• Midship
• Port
Model Transducer model or "none"
Trim
Distance between transducer and keel in
metres
Blocking depth
Blocking depth in metres
The blocking depth defines the distance
under the transducer at which the depth
measurement is to be started. This pre-
vents, for example, an echo reflected by
parts of the ship in the vicinity of the trans-
ducer leading to wrong depth measure-
ment values.
Tab. 6.21: Parameters of the Channels
WARNING!
Unauthorised changes can result in serious injury or even death.
Unauthorised modification of the configuration parameters can endanger the safety of
the ship and result in very serious injury or even death.
 Changes to the configuration parameters may only be made by qualified personnel.