manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Operating Instructions Manual, Page: 75 / 136

Share
Download
WÄRTSILÄ ELAC LAZ 5200 Operating Instructions Manual Download Page 75

R

efer to pr

otection

 notice ISO 16016

TH 52 614 8001 EN Rev. A 09/2018

Wärtsilä ELAC Nautik GmbH 

73 / 134

ELAC LAZ 5200 –  Operating Instructions

Operation

Unlocking sub-menu

6.5.4.5

Closing the Menu

Proceed as follows to unlock a sub-menu:

1. Open the menu 

6.5.4.1.

2. Navigate to the corresponding menu 

item 

6.5.4.2.

3. Press the 

[ENTER]

 key to confirm the 

selection.
–

The warning

 is displayed.

4. Select “Yes” by pressing the 

[CUR-

SOR]

 keys (up or down).

5. Press the 

[ENTER]

 key to confirm the 

selection.
–

The sub-menu is unlocked. The pa-
rameters can be changed.

–

An open padlock is displayed in 
front of the menu item in the "MAIN 
MENU".

Fig. 6.37: Unlocking Sub-menu

The sub-menu remains unlocked as long as the menu is open. If the menu is closed and 
then opened again, the sub-menu has to be unlocked again.

Proceed as follows to close the menu:

1. Press the 

[ESCAPE]

 key

.

–

The menu is closed.

Fig. 6.38: Closing the Menu

ENTER

ESCAPE

CURSOR

The menu is only closed when the blue cursor is in the "MAIN MENU". If the cursor is in 
a sub-menu, the 

[ESCAPE]

 key has to be pressed accordingly until the menu is closed.

Summary of Contents for ELAC LAZ 5200









































































































































Reviews:

No comments